Home Improvement

How to Prepare for a Concrete Garage Floor Coating

Many people do not realize how profitable the market around the world is for different kinds of floor coatings.

The numbers show that people and institutions spend upwards of $2.6 billion on floor coatings services every year! On top of that, the industry is expected to almost double in size between 2019 and 2027.

If you have ever seen what a coating can do for a concrete garage floor, then you will better understand why so many people are interested in this market. At the same time, some people are trying to wrap their heads around the whole garage floor coating process.

There are important preparatory steps to take before starting to apply the coating. So what are the most important things to do before proceeding with a garage floor coating?

Read on to learn all about the most important things to do with your garage floor before it is time to coat it!

Perform a Garage Floor Preparation Cleaning

Before anything else, you will want to clean your garage before starting the coating process. Garage floors tend to accumulate dust, dirt, and other contaminants. If any of these contaminants are present, then the coating process will seal them inside.

This provides a number of disadvantages. First, it can interfere with how well the coating adheres to the concrete floor.

Second, it can make your finished product look less beautiful than it otherwise would. After a successful garage floor coating, your floor will look much fresher and freer of flaws.

It is also important to keep in mind that failing to clean means that there will be dirt on the garage floor as you try to go through the other steps of preparation.

Most people have never tried to clean a concrete floor as thoroughly as they can. Doing a good job of cleaning a concrete floor is somewhat different from cleaning carpet or tile or wood.

First, you will want to vacuum or sweep your garage floor. However, that will only remove a certain amount of dirt.

After a thorough sweep or vacuuming, you will want to use soap and water to clean your floor. In fact, it may be best to use powerful detergents to do a deep cleaning.

This will also help remove grease and oil. It is almost impossible to remove grease and oil by sweeping alone. Even mopping will be unsuccessful without plenty of soap or detergent.

Keep in mind that after this kind of cleaning process, there will be a little bit of white residue that might show up on your floor. If you run your fingers across the floor after this cleaning, don’t be shocked if you see this white residue.

Use the Right Acid for Your Garage Flooring

One of the most important parts of the coating process is the robustness of the seal between your floor and the coating. In order to make the most powerful seal possible, you want to create a somewhat rough surface on the concrete. That will give the coating extra surfaces to grip.

For this reason, it is important to apply the right kind of acid solution to a garage floor before coating it. This acid will rough up the surface of the concrete, making it an ideal surface for the coating to adhere to.

Of course, it is essential to exercise caution while applying the acid solution. You will want to have a mask and gloves as you go through the process.

It is also important to read through the manual before using your acid solution product. Of course, most people rely on professionals for this step in the process. You can check the following link to learn more about how they prepare a garage floor.

Etch Before You Coat a Garage Floor

There are multiple ways to provide a rough surface for the floor coating. After applying the acid solution, it is important to etch the concrete. In fact, it is important to roughly scrub the concrete while the acid solution is still on it.

This will help create the rough and etched surface that the coating needs so that it can adhere to your concrete garage floor.

Rinse the Floor Before Applying the Epoxy Coating

After applying the acid and etching your concrete floor, you will want to rinse it off. Remember that you do not want to smooth out the rough surface.

Therefore, you will want to use mostly water to rinse things off and a minimum of scrubbing and other physical stimulation.

Prepare the Rest of the Room for a Coating

After rinsing off the floor, your floor itself will be ready to go. However, you may want to prepare the rest of the garage floor before moving on to apply the coating.

For example, you may want to remove baseboards near the floor. You may also want to apply some tape along the bottom edges of your walls to make sure that the floor coating does not end up on your walls.

Prepare the Garage Floor Coating

At this point, your garage will be ready for the coating. It is now time to create the coating solution, adding the resin and the catalyst appropriately.

Once you have your coating, you can apply it to the floor.

Understand How to Prepare a Concrete Garage Floor for the Coating Process

Before coating a concrete garage floor, it is essential to take the right preparatory steps. Some people get the impression that floor coatings are not as effective as they are because they do not go through the preparation process correctly.

Of course, when you hire professionals, they will go through each step carefully to make sure the end result is up to standard.

To learn more about the latest developments in technology, lifestyle, and more, take a look at our other articles!

You may also like...