If your hardwood floors are looking a little dull, you may be considering refinishing them. This is a big job, but it’s one that you can do yourself with the right supplies and a little bit of elbow grease. In this article, we’ll show you how to refinish hardwood floors so that they look like new again.
Materials You’ll Need
When it comes to refinishing hardwood floors, the materials you use are just as important as the process itself. You’ll need to pick up a few supplies before you get started, including:
-A floor sander ( either a hand-held orbital sander or a drum sander)
-Sandpaper (both coarse and fine grit)
-A paintbrush or roller
-Stain (if you want to change the color of your floors)
-Polyurethane (to protect the newly refinished floors)
With these materials in hand, you’re ready to start refinishing your hardwood floors!
Before you refinish hardwood floors, it’s important to take the time to properly prep the surface. This will ensure that your new finish will last for many years to come.
Start by removing all furniture and rugs from the room. Then, thoroughly vacuum the floor to remove any dirt or debris. Next, use a mild soap and water solution to clean the floor, paying special attention to any areas that are particularly dirty or scuffed up.
Once the floor is clean, use a sanding block to lightly sand the surface. This will help improve the adhesion of the new finish. Be sure to sand in the direction of the grain to avoid damaging the wood.
When you’re finished sanding, use a vacuum and damp cloth to remove any dust from the floor. Then, you’re ready to apply your new finish!
Sanding and Prepping
If you’re planning to refinish your hardwood floors, the first step is to sand and prep the surface. This is a critical step in ensuring that your new finish will look its best and last for many years to come. Here’s what you need to know about sanding and prepping hardwood floors for refinishing.
The first thing to know is that you’ll need to rent a floor sander to do the job right. A hand-held sander will work, but it will take much longer and be more difficult than using a floor sander. Once you have your sander, the next step is to choose the right sandpaper. For most hardwood floors, you’ll want to use a medium-grit paper. If your floors are particularly damaged or scratched, you may want to start with a coarse-grit paper and then move to medium-grit.
Once you’ve chosen your sandpaper, it’s time to get started. Begin by sanding along the grain of the wood, moving slowly and evenly over the entire surface. Be sure to keep the sander moving; if you stay in one spot for too long, you could damage the wood. When you’re finished sand.
Takeaway: If you’re looking for a company to refinish your hardwood floors, we recommend Plancher Newlook. They specialize in hardwood floor sandblasting, which is a process of removing the top layer of wood to reveal a new, fresh layer beneath. This can give your floors a whole new look and feel. Plus, it’s a much more durable finish that will withstand heavy traffic and wear and tear.
Applying a Solid Stain or Urethane Top Coat
If you have hardwood floors that are in need of a refinish, there are a few different options you can choose from. One option is to apply a solid stain to the floor. This will give the floor a new, uniform color. Another option is to apply a urethane top coat. This will protect the floor and give it a glossy finish.
Refinishing hardwood floors is a great way to add value and beauty to your home. With the right tools and supplies, it’s a relatively easy project that most homeowners can do themselves. We hope our guide has given you everything you need to get started on refinishing your own hardwood floors. If you have any questions, be sure to consult a professional before beginning the project. Good luck!